Ampire BTR300
695 kr / Styck
Bluetooth mottagare via AUX (Strömtillförsel via USB)
Läs mer
*INFO OM LAGERSALDO
- Då vi jobbar med flera externa lager för direktleverans till kund, så kolla gärna vårt butikslager först innan du besöker butiken i Ullared. Detta gäller även för internet kunder under storhelger. Så som Black Friday/week, mellandagsrea, inför julhandeln för julklappar m.m där försäljningstrycket ökar.
- Vi kan inte bli ansvariga att leverera en produkt som är slutsåld eller utgången ur sortimentet. Skulle en produkt inte gå att leverera så meddelar vi det via E-post eller per Telefon.
- Vi strävar givetvis mot att kunna leverera det vi har på våran sida.
- Är du osäker så skicka gärna ett mail till info@ullareddigital.se
Bluetooth mottagare som kopplas in via AUX. Strömtillförsel via USB
FEATURES
- Marine certified
- with auto turn on function
- certified Bluetooth 4.0 CRS I9chip
- 3.5mm jack output with 1.0V Signal output
- QDL licensed
- SSID Name: BTR300
CONNECTIONS
- USB Input (5 VDC) (300mm)
- 3.5mm jack Output (300mm)
BLUETOOTH LICENSE- Declaration ID D025151
- Referenced Qualified Design ID 56386- Listing Date 08 December 2014
PAIRING
- Ensure that your streaming device has Bluetooth enabled.
- Turn the ignition (ACC) on.
- The LED (6) starts blinking (pairing mode).
- Select BTR300 in your devices Bluetooth setup menu.
- When successfully connected, the LED on the BTR300 will stop blinking and remain lit. A single beep will be heard through the connected sound system.
ATTENTION
- Multiple devices can be paired to the BTR300, but only one device can connect at one time.
- The BTR300 will remember the last device which was connected to it and reconnect with it automatically. If that device is not active, then other paired devices can connect manually, or new devices can be paired.
- When a connected device is out of range for more than one minute, the BTR300 will automatically disconnect it and returns to pairing mode [the LED (6) starts blinking].
OPERATING
- Once connected, audio is controlled from the streaming device. This includes volume and media selection.
- The BTR300 can be installed out of sight, as it has no user controls that needs to be accessed.
SPECIFICATIONS
- Power: 5V DC (USB)
- Current consumption: 40mA max.
- Bluetooth 4.0
- Frequency range: 20Hz-20kHz
- Output level: 1V RMS
FEATURES
- Marine certified
- with auto turn on function
- certified Bluetooth 4.0 CRS I9chip
- 3.5mm jack output with 1.0V Signal output
- QDL licensed
- SSID Name: BTR300
CONNECTIONS
- USB Input (5 VDC) (300mm)
- 3.5mm jack Output (300mm)
BLUETOOTH LICENSE- Declaration ID D025151
- Referenced Qualified Design ID 56386- Listing Date 08 December 2014
PAIRING
- Ensure that your streaming device has Bluetooth enabled.
- Turn the ignition (ACC) on.
- The LED (6) starts blinking (pairing mode).
- Select BTR300 in your devices Bluetooth setup menu.
- When successfully connected, the LED on the BTR300 will stop blinking and remain lit. A single beep will be heard through the connected sound system.
ATTENTION
- Multiple devices can be paired to the BTR300, but only one device can connect at one time.
- The BTR300 will remember the last device which was connected to it and reconnect with it automatically. If that device is not active, then other paired devices can connect manually, or new devices can be paired.
- When a connected device is out of range for more than one minute, the BTR300 will automatically disconnect it and returns to pairing mode [the LED (6) starts blinking].
OPERATING
- Once connected, audio is controlled from the streaming device. This includes volume and media selection.
- The BTR300 can be installed out of sight, as it has no user controls that needs to be accessed.
SPECIFICATIONS
- Power: 5V DC (USB)
- Current consumption: 40mA max.
- Bluetooth 4.0
- Frequency range: 20Hz-20kHz
- Output level: 1V RMS
Liknande produkter
